R&S®TS-PSM1 Power Switching Module

Характеристики - R&S®TS-PSM1 Power Switching Module

High-power multiplexer and multiple DUT power switching module
Key Facts

• Power switching module for supplies and loads
• Switching module for voltages of up to 70 V
• 8 high-power channels with 16 A max.
• 10 power channels with 2 A max.
• 4 high-power 4-to-1 multiplexer channels with 16 A max.
• Indirect high-current measurements on high-power channels via shunt resistors
• Direct current measurements up to 1 A in all channels via R&S®TSVP analog measurement bus and R&S®TS-PSAM
• Selftest of all relays via R&S®TSVP analog measurement bus and R&S®TS-PSAM
• Analog measurement bus access to 8 bus lines
• Control interface based on CAN bus
• Usable in R&S®CompactTSVP and R&S®PowerTSVP
• LabWindows/CVI device driver support
• GTSL test software library in DLL format

Brief Description The R&S®TS-PSM1 is a power switching module controlled by a CAN-bus interface. Its innovative technology and versatile functionality make it ideal for automotive and high-current switching applications, e.g. power-management and test-load paradigms.
Specifications

Specifications
Application in the R&S®TSVP platform	R&S®CompactTSVP or R&S®PowerTSVP	1 slot required
Interface
Control bus		CAN 2.0b (1 Mbit/s)
DUT connector (front)		DIN 41612, 96 pins
I/O connector (rear)		CompactPCI connector J2, 110 pins
Control logic
Local microprocessor		ST10, 16 bit, 40 MHz
Switching characteristics
High-power switching channels
	number/type of relays	8/Zettler AZ764
	contact configuration	8 ? SPST
	switching voltage DC/AC (max.)	70 V DC, 46 V peak, 33 V (RMS)
	switching current (max.)	16 A/16 A RMS (continuously)
	switching power (max.)	480 W/4000 VA (resistive load)
	current measurement
	indirect via shunt	5 m? shunt resistor ±0.6% ±60 ppm/K (for 20°C to 60°C)
	direct via analog bus	with R&S®TS-PSAM, 1 A/10 W (max.)
High-power multiplexer
	number/type of relays	16/Zettler AZ764
	contact configuration	4 multiplexers, 4-to-1
	switching voltage DC/AC (max.)	70 V DC, 46 V peak, 33 V (RMS)
	switching current (max.)	16 A/16 A RMS (continuous)
	switching power (max.)	480 W/4000 VA (resistive load)
Medium-power switching channels
	number/type of relays	10/Zettler AZ832
	contact configuration	10 ? SPST
	switching voltage DC/AC (max.)	70 V DC, 46 V peak, 33 V (RMS)
	switching current (max.)	2 A/2 A RMS (continuously)
	switching power (max.)	150 W/250 VA (resistive load)
	current measurement direct via analog bus	with R&S®TS-PSAM, 1 A/10 W (max.)
Monitor switching channels
	number/type of relays	6/Meder RM-05
	contact configuration	12 multiplexers 4-to-1
	switching voltage DC/AC (max.)	70 V DC, 46 V peak, 33 V (RMS)
	switching current (max.)	1 A/1 A RMS (1.5 A carry)
	switching power (max.)	10 W
	current measurement direct via analog bus	with R&S®TS-PSAM, 1 A/10 W (max.)
Analog measurement bus access		8 lines

General data
Power consumption		+5 V/4.0 A (max., all relays switched)
Environmental conditions
Temperature	operating temperature range	+5°C to +40°C
	storage temperature range	–10°C to +60°C
Damp heat		+40°C, 80% rel. humidity, steady state, in line with EN 60068-2-30,
Mechanical resistance
Vibration	sinusoidal	5 Hz to 55 Hz, 0.15 mm amplitude const., 55 Hz to 150 Hz, 0.5 g const., in line with EN 60068-2-6
	random	10 Hz to 300 Hz, acceleration 1.2 g (RMS), in line with EN 60068-2-64
Shock		40 g shock spectrum, in line with MIL-STD-810E, method 516.4, procedure I
Product conformity
Electromagnetic compatibility	EU: in line with EMC Directive 2004/108/EC	applied harmonized standards: EN 61326-1 (industrial environment), EN 61326-2-1, EN 55011 (class A), EN 61000-3-2, EN 61000-3-3
Electrical safety	EU: in line with Low Voltage Directive 2006/95/EC	applied harmonized standard: EN 61010-1
Dimensions	W ? H ? D	20 mm ? 174 mm ? 316 mm (0.79 in ? 6,85 in ? 12,44 in)
Weight		0.75 kg (1.65 lb)
Calibration		not required