Kübler 1S-1P
В продаже Преобразователи сигналов Kübler 1S-1P оптом и в розницу. Нашли дешевле? Предоставьте свою цену, Мы сформируем более выгодное предложение. При заказе от 3000р., доставка по Самаре - БЕСПЛАТНО! Возможна отправка товара в любую точку РФ транспортной компанией.
Цена:
Технические характеристики
Характеристики - Kübler 1S-1P
Signal converter with parallel output.The converter module for industrial applications where a sensor or encoder signal in SSI format needs to be converted into a parallel signal.The device has 12 screw terminals and a 37-pin (parallel) Sub-D socket.The module is quickly and easily mounted in the control cabinet on a standard DIN rail.| Mechanical | |
|---|---|
| Dimension | 45 mm x 118 mm x 137 mm |
| Working temperature | 0 °C ... 50 °C |
| Protection level | IP20 |
| Connections | Screw terminalsSub-D connector |
| Electrical | |
|---|---|
| Input interfaces | SSI, binarySSI, grey |
| Output interfaces | Parallel |
| Coding inputs | D+, D-, Clk+, Clk-, GNDD+, D-, Clk+, Clk-, GND |
| Coding outputs | Bit1...25, Vs, Strobe, Hold, GND |
| Input frequency | 100.000 Hz |
| Output frequency | 30 Hz |
| Supply voltage | 5 V DC12 V DC18...36 V DC |
- Input: synchronous serial interface SSI.
- Output: parallel, max. 26 bits, 8 .. 30 V, max. 100 mA,short-circuit proof and bus-capable.
- Master/Slave operation switchable.
- Switchable Gray/Binary input code.
- Switchable Gray/Binary/BCD output code.
- Hold and OE inputs.
- Strobe output.
- Housing for DIN rail mounting EN 50022.
- Connection with plug-in screw terminals and 37-pin Sub-Dsocket.
- SSI encoders for retrofitting old controls with parallel input.