Kübler Codix 565

Характеристики - Kübler Codix 565

Process controller with totalizer function.The Codix 565 process control unit with totalizer function displays measured values of V and mA standard signals in high resolution and monitors and controls 2 limit values.These fast displays set new standards in user-friendliness. Thanks to an easy-to-read 14-segment LED display, comprehensible scroll help texts and a practical short instruction card, the annoying reading of extensive instructions is no longer necessary.Optionally also with analog output.

Mechanical
Model	electronic
Function	Process displays for standard signals
Dimension 1	96 x 48 mm | 92 x 45 mm
Protection level	IP65
Working temperature	-25 °C ... +75 °C
Weight	180 g

(1) Installation | Front panel

Electrical
Supply voltage	100 - 240 (± 10%) V AC10...30 V DC
Signal input	Analog ±10 VAnalog 0–10 VAnalog 0–20 mAAnalog 2–10 VAnalog 4–20 mA
Signal output	Analog 0–10 VAnalog 0–20 mAAnalog 2–10 VAnalog 4–20 mA2 relays

User-friendly

• Practical short instruction card for parameterization and operation of the device
• Help texts as ticker
• Easy-to-read 14-segment LED display, 6-digit, 14 mm high
• Simple programming with 4 front keys
• One front key and 2 additional inputs can be programmed for specific applications
• Customer-specific characteristic curve via 12 interpolation points for all measuring signal inputs
• Min/max memory individually resettable

Powerful

• Measuring rate of 10 measurements/second
• Time-controlled totalizer function for adding up measured values, can be reset separately
• 2 relay outputs (change-over contacts) for limit monitoring with hysteresis and on/off delay function for current measurement or totalizer values
• Analog output for current measured value, min. value, max. value or totalizer value
• Sensor power supply 15 V DC / 25 mA, also for
• Wire transmitters
• Inputs and outputs electrically isolated
• First-order digital filter for smoothing display fluctuations with unstable input signals
• Tare function