Kübler 573T
В продаже Дисплеи и счетчики Kübler 573T оптом и в розницу. Нашли дешевле? Предоставьте свою цену, Мы сформируем более выгодное предложение. При заказе от 3000р., доставка по Самаре - БЕСПЛАТНО! Возможна отправка товара в любую точку РФ транспортной компанией.
Цена:
Технические характеристики
Характеристики - Kübler 573T
Touch process controller with 2 analog inputs.The process control unit with 2 analog inputs can be used in both single-channel and dual-channel operation. For two-channel operation, all arithmetic operations are available to display the sum, difference, ratio or product. Inputs and outputs are separately scalable.Can be used as a simple process converter, process control unit (2 point controllers) or for complex measuring tasks in which 2 values are to be monitored, calculated or further processed in a higher-level control system.| Mechanical | |
|---|---|
| Model | Dual-function device electronic |
| Function | Process displays for standard signals |
| Dimension 1 | 96 x 48 mm | 92 x 45 mm |
| Protection level | IP20IP65 |
| Working temperature | -20 °C ... +60 °C |
| Weight | 200 g |
| Reset | electronic |
| Electrical | |
|---|---|
| Supply voltage | 115 V AC230 V AC18...30 V DC |
| Signal input | Analog ±10 VAnalog 0–20 mAAnalog 4–20 mAPNP |
| Signal output | Analog ±10 VAnalog 0–20 mAAnalog 4–20 mARS2322 relays4 x PNP |
- 2 separate freely scalable analog inputs ±10 V and 0/4 to 20 mA, resolution 16 bit.
- Tare function, the device can be set to 0 at any input voltage.
- Programmable linearization With up to 24 support points, input via keyboard or by means of the teach function.
- Mean value measurement programmable from 2 to 16 measuring cycles, with strongly fluctuating input signals.
- Simple programming by entering the desired display value for a defined input signal.
- Fast measuring rate of 25 ms per channel alternating.
- RS232 or RS485 serial interface for reading and writing data.
- Up to 3 display values in one device, display A, display B, calculated display from A and B.
- AC and DC power supply in one device.
- Simple plain text programming via touch display and separate tare or teach function.
- Can be used as a simple process converter, process control unit (2 point controllers) or for complex measuring tasks in which 2 values are to be monitored, calculated or further processed in a higher-level control system.
- Mathematical linking of the measured values of input A and B. The result can also be multiplied, divided or added to an offset value to obtain the desired display value.
- Analog output 0/4 to 20 mA, or ±10 V.
- 4 fast PNP switching outputs, 50 ms, with switching hysteresis, step or drag preset.
- Programmable display update.