Датчик процесса Keyence AP-C40WP
В продаже Датчики процесса Датчик процесса Keyence AP-C40WP оптом и в розницу. Нашли дешевле? Предоставьте свою цену, Мы сформируем более выгодное предложение. При заказе от 3000р., доставка по Самаре - БЕСПЛАТНО! Возможна отправка товара в любую точку РФ транспортной компанией.
Цена:
Технические характеристики
Характеристики - Датчик процесса Keyence AP-C40WP
Amplifier Unit PNP| Model | AP-C40WP | |
| Type | Amplifier Unit, PNP | |
| Applicable sensor head | AP-41M, AP-41, AP-43, AP-44, AP-48 | |
| Set and display range | -15 to +110 % of F.S.*1 | |
| Display | 3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s | |
| Repeatability | ±0.2 % of F.S. | |
| Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |
| Display resolution | AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa | |
| Power consumption | Normal | 12 V: 960 mW (80 mA) max., 24 V: 1,400 mW (60 mA) max. |
| Display temperature characteristic | ±1 % of F.S. max. | |
| Hysteresis | Variable (Standard: 0.5 % of FS, high-resolution/focus mode: 0.1 % of F.S.) | |
| Response time (Chattering prevention function) | 1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable) | |
| I/O | Analogue output | 1 to 5 V with load impedance of 1 kW max. (or zero-shift input selectable) |
| Zero-shift input | Input time: 2 ms or more (or analog output selectable) | |
| Control output | PNP open collector 100 mA max. (at 30 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable) | |
| Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Power consumption | Eco mode | 12 V: 660 mW (55 mA) max., 24 V: 1,080 mW (45 mA) max. |
| Environmental resistance | Ambient temperature | 0 to +50 °C (No freezing) |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Material | Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate | |
| Accessories | Power supply code (2-m cable with connector), head connector, and unit seal | |
| Weight | Approx. 74 g (with 2-m cable) | |
| *1 The focus range applies while in focus mode only. |