Датчик измерения Keyence TM-3001
В продаже Датчики измерения Датчик измерения Keyence TM-3001 оптом и в розницу. Нашли дешевле? Предоставьте свою цену, Мы сформируем более выгодное предложение. При заказе от 3000р., доставка по Самаре - БЕСПЛАТНО! Возможна отправка товара в любую точку РФ транспортной компанией.
Цена:
Технические характеристики
Характеристики - Датчик измерения Keyence TM-3001
Controller| Model | TM-3001 | |
| Head compatibility | Compatible | |
| Number of connectable sensors | 2 units max.*1 | |
| Display | Minimum display unit | 0.01 µm, 0.001 mm2, 0.01 ° |
| Maximum display range | ±9999.99 mm, ±99999.9 mm2, ±99999.9° | |
| Input terminal block | Laser remote interlock input | Non-voltage input*2 |
| Trigger input (for Head A) | ||
| Timing 1 input | ||
| Auto-zero 1 input | ||
| Reset input | ||
| Output terminal block | Analogue voltage output | ±10 V x 2 outputs, out put impedance: 100 ?*2 |
| Total judgment output | NPN open-collector output*2 | |
| Error output | NPN open-collector output (N.C.)*2 | |
| Process output | NPN open-collector output*2 | |
| Trigger input enable output | ||
| Adjusted error output | ||
| Expansion connector | Trigger input (for Head A) | Non-voltage input*2 |
| Timing 2 input | ||
| Auto-zero 2 input | ||
| Programme switching input | Non-voltage input, 4 inputs*2 | |
| Memory card save input | Non-voltage input*2 | |
| Judgment/Binary output | 3-level judgment output: OUT1 to OUT16, total judgment output Binary output: OUT1 to OUT16 measured data output (21 bits) NPN open-collector output*3 | |
| Strobe output | NPN open-collector output*2 | |
| Trigger input enable output | ||
| Analogue RGB monitor output | SVGA (800 x 600 pixels) | |
| RS-232C interface | Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable) | |
| USB interface | In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible) | |
| Ethernet interface | 1000BASE-T/1000 BASE-TX/10 BASE-T | |
| Memory card | SD card CA-SD4G (4GB), CA-SD1G (1GB) support | |
| Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Current consumption | 1 head connected 480mA max./ 2 heads connected 550mA max. | |
| Environmental resistance | Ambient temperature | 0 to +50 °C |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Material | Polycarbonate | |
| Weight | Approx. 1,120 g | |
| *1 1 or 2 units can be connected only with the same head model *2 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA) *3 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA). OUT 1 to OUT 8 decision result, OUT 9 to OUT 16 decision result, time share output of binary measurement data. |