Датчик измерения Keyence LJ-V7001P

В продаже Датчики измерения Датчик измерения Keyence LJ-V7001P оптом и в розницу. Нашли дешевле? Предоставьте свою цену, Мы сформируем более выгодное предложение. При заказе от 3000р., доставка по Самаре - БЕСПЛАТНО! Возможна отправка товара в любую точку РФ транспортной компанией.

КУПИТЬ В 1 КЛИК
Цена:
Датчик измерения Keyence LJ-V7001P

Технические характеристики

Характеристики - Датчик измерения Keyence LJ-V7001P

Controller, PNP Type
ModelLJ-V7001P
Number of connectable sensorsMax. 2 units
DisplayMinimum displayable unit0.1 µm, 0.00001 mm2, 0.01°
Maximum display range±9999,99mm, ±9999,99mm2
Input terminal blockLaser remote interlock inputNon-voltage input*1
Input terminal blockEncoder inputNPN open-collector output, voltage output (5 V/12 V/24 V), and line-driver output all supported
Input terminal blockTrigger inputVoltage input*2
Timing 1,2 input
Auto-zero 1,2 input
Input terminal blockReset 1, 2 input
Input terminal blockStart measurement/stop input
Start storage/stop input
Clear memory input
Laser OFF input
Programme switch inputVoltage input x 4 inputs*2
Output terminal blockAnalogue voltage output±10 V x 2 outputs, Output impedance: 100 ?
Output terminal blockOUT comparator outputPNP open collector output x 12 outputs*3 (Can freely assign 16 OUTs x 3 stage judgement results)
Strobe outputPNP open collector output*3
Disable trigger output
Memory FULL output
Ready output
Output terminal blockError outputPNP open collector output (N.C.)*3
PC interfaceEthernet1000BASE-T/100BASE-TX
USBUSB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)
RS232CMeasurement data output and control I/O (Can select a baud rate of up to 115,200 bits/s)
RatingPower voltage24 VDC ±10 %, including Ripple (P-P)
Current consumption1.3 A or less when connected to 1 head 1.9 A or less when connected to 2 heads
Environmental resistanceAmbient temperature0 to +50 °C
Relative humidity20 to 85 % RH (No condensation)
WeightApprox. 1,500 g
*1 The rating for non-voltage input is up to 1 V for ON voltage and up to 0.6 mA for OFF current *2 The rating for voltage input is a maximum input voltage of 26.4 V, a minimum ON voltage of 10.8 V, and up to 0.6 mA for OFF current *3 The rating for PNP open-collector output is up to 50 mA (30 V or less), residual voltage of up to 1 V