Датчик измерения Keyence GT2-PA12KL

В продаже Датчики измерения Датчик измерения Keyence GT2-PA12KL оптом и в розницу. Нашли дешевле? Предоставьте свою цену, Мы сформируем более выгодное предложение. При заказе от 3000р., доставка по Самаре - БЕСПЛАТНО! Возможна отправка товара в любую точку РФ транспортной компанией.

КУПИТЬ В 1 КЛИК
Цена:
Датчик измерения Keyence GT2-PA12KL

Технические характеристики

Характеристики - Датчик измерения Keyence GT2-PA12KL

Stylus type Air cylinder type High-precision Sensor head (Low measuring force type)
ModelGT2-PA12KL
Detection systemScale Shot System II, absolute (no tracking errors) type
Measuring range12 mm
Resolution0.1 µm
Indicated accuracy1 µm (P-P)*1
Measuring forceDownward mounting0.4 N*2
Side mounting0.35 N*2
Upward mounting0.3 N*2
Sampling cycle4 ms
Fluid usedClean dry air
Operation indicator light2-color LED (red, green)
Environmental resistanceEnclosure rating-
Pressure resistance0.5 MPa
Applied pressure range0.05 MPa to 0.07 MPa
Ambient temperature0 to +55 °C (No freezing)
Relative humidity35 to 85 % RH (No condensation)
Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance1,000 m/s2 (IEC60068-2-27)
MaterialsMain bodyMain body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
ContactSUS304, cemented tungsten carbide*3
Sensor head cableOptional (connect to relay connector)
WeightApprox. 35 g (not including cable)*4
*1 Value when the ambient temperature is 20 °C. *2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12KL/PA12L with a pressure of 0.06 MPa. The measuring force varies depending on the air pressure used. For details, see table 1.No dust boots are used with the GT2-PA12KL/PA12L. *3 Contacts are available as options sold separately. *4 Including the relay connector.