Датчик измерения Keyence GT2-E3P
В продаже Датчики измерения Датчик измерения Keyence GT2-E3P оптом и в розницу. Нашли дешевле? Предоставьте свою цену, Мы сформируем более выгодное предложение. При заказе от 3000р., доставка по Самаре - БЕСПЛАТНО! Возможна отправка товара в любую точку РФ транспортной компанией.
Цена:
Технические характеристики
Характеристики - Датчик измерения Keyence GT2-E3P
Extension Board for GT2-100P| Model | GT2-E3P | |
| Output | PNP output | |
| Mounting type | Installed into GT2-100N/100P (up to 3 boards) | |
| Main unit/Expansion unit | - | |
| Power supply voltage | Supplied from the GT2-100N/100P | |
| Power consumption | Normal | 4,200 mW max. (30 V, 140 mA max.)*1? |
| Power saving (Eco) | 4,000 mW max. (30 V, 133.3 mA max.) | |
| Display power | Measured value display | - |
| Other displays | ||
| Display range | ||
| Display resolution | ||
| Sampling rate | 1,000 times/sec. | |
| Control input | Timing/preset/ reset/bank input | No-voltage input |
| Control output | HH/HI/GO/LO/LL | PNP open collector, 30 V 50 mA or less*2, residual voltage 1 V or less |
| Response time | hsp (3 ms), 5 ms, 10 ms, 100 ms, 500 ms, 1 s | |
| Environmental resistance | Ambient temperature | -10 to +50 °C (No freezing) |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Materials | Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET | |
| Power supply / I/O cable | I/O: 30-pin connector (MIL standard) | |
| Weight | Approx. 80 g | |
| *1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode. *2 When 2 or more sensor heads are connected, 20 mA or less. |