Датчик безопасности Keyence GL-T11R
В продаже Безопасность Датчик безопасности Keyence GL-T11R оптом и в розницу. Нашли дешевле? Предоставьте свою цену, Мы сформируем более выгодное предложение. При заказе от 3000р., доставка по Самаре - БЕСПЛАТНО! Возможна отправка товара в любую точку РФ транспортной компанией.
Цена:
Технические характеристики
Характеристики - Датчик безопасности Keyence GL-T11R
Safety Relay Terminal| Model | GL-T11R | ||
| Applicable model | GL-R Series | ||
| Relay output | FSD1,2 | 250 VAC 6 A 30 VDC 6 A (Resistance load) 240 VAC 2 A (COSo=0.3) (Inductive load) 24 VDC 1 A (COSo=0.3) (Inductive load) | |
| Life-span | Electrical life-span | 100,000 cycles or more with 250 VAC 6 A resistance load (open/close frequency: 20 times/minute) 100,000 cycles or more with 30 VDC 6 A resistance load (open/close frequency: 20 times/minute) 500,000 cycles or more with 250 VAC 1 A resistance load (open/close frequency: 30 times/minute) 500,000 cycles or more with 30 VDC 1 A resistance load (open/close frequency: 30 times/minute) AC15: 100,000 cycles or more with 240 VAC 2 A inductive load (open/close frequency: 20 times/minute, coso = 0.3) DC13: 100,000 cycles or more with 24 VDC 1 A inductive load (open/close frequency: 20 times/minute, L/R = 48 ms) | |
| Response time | ON>OFF | GL-R +10 ms | |
| OFF>ON | GL-R +32 ms | ||
| Supplemental output (Non-safety-related output) | AUX | Transistor output (PNP/NPN input device can be connected.)*1 50 mA max., residual voltage 2.5 V max. (When the cable between the GL-R and GL-T11R is 5 m) | |
| Error output | |||
| Muting lamp output | Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected. | ||
| External input | EDM inputWait inputReset inputMuting input 1, 2Override input | ON voltage: [Power supply voltage - 5 V] to [Power supply voltage] OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only) | |
| Rating | Power voltage | 24 VDC ±10%, ripple (P-P) 10% or less, Class 2 | |
| Current consumption | 100 mA max. (24 VDC, GL-T11R only) | ||
| Approved standards | EMC | EMS | EN61496-1, UL61496-1, IEC61496-1 |
| EMI | EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA | ||
| Safety | EN61496-1, UL61496-1, IEC61496-1 (Type4 ESPE) EN ISO13849-1 : 2015 (Category4, PLe) UL508, EN50178 | ||
| Environmental resistance | Enclosure rating | IP20 (IEC60529) Must be installed within a control panel rated at IP54 or higher. | |
| Pollution degree | 2 | ||
| Overvoltage category | III | ||
| Operating ambient temperature | -10 to +55 °C (No freezing) | ||
| Storage temperature | -25 to +60 °C (No freezing) | ||
| Operating relative humidity | 15 to 85 % RH (No condensation) | ||
| Storage relative humidity | 15 to 95 % RH | ||
| Altitude | 2,000 m or less | ||
| Vibration resistance | 10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions | ||
| Shock resistance | 100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions | ||
| Material | Main unit case | Polycarbonate | |
| Weight | Approx. 310 g | ||
| *1 The output operation is the same as that when the PNP output type cable is used. |