Hengstler 480

Характеристики - Hengstler 480

The development of this safety relay product family was consequently linked to the demands of our customers and the market. The outcome is the worldwide smallest 6-contact force guided relay with a reinforced insulation between all contacts. Additional focus was put on low coil power consumption to reduce the heat, emitted by the relay, to a minimum. Due to the constant high number of electrical switching cycles, the new H-480 can be used for a broad range of safety applications. The variety of pin arrangements enables the customer a variable used of the relay, also in existing applications.

• 6 contacts
• max. 8 A switching & permanent current
• Drive is monostable as DC
• Ambient temperature -25 to +75 °C
• With forcibly guided contacts to EN 50205, application type A
• cULus and TUV approval

Function / Application	Safety relay
Product line	HENGSTLER
Relay family	480
Contactset	forcibly guided
According EN 50205	Application type A
Ambient temperature [°C]	-25 ... +75 °C
Soldering heat resistance [°C]	260 °C
Max. soldering time [s]	5 s
Pins pre-soldered with	Sn 100
Approval	TUV cULus
Standards	IEC EN 61810-3 (EN 50205) IEC EN 61810-1 UL 508
Meets the requirements	RoHS

Number of NO contacts	4
Number of NC contacts	2
Number of CO contacts	0
Size	2
Dimensions L x W x H [mm]	55,0 x 16,5 x 15,7 mm
Housing	washtight (RT III)
Shock resistance NO / NC [g]	20/3 g
Puls duration (half sinus)	11 ms
Vibration resistance NO / NC [g]	15/3 g
Frequency range [Hz]	10 - 200 Hz
Operating time NC contact, contact opens [ms]	11 ms
Operating time NO contact, contact closes [ms]	17 ms
Releasing time NO contact, contact opens [ms]	5 ms
Releasing time NC contact, contact closes [ms]	17 ms
Mechanical service life (without load)	10,000,000 switching cycles
Connection type	Solder pins for pcb
Weight [g]	30 g

Drive system	DC monostable
Nominal coil voltage [V]	5,5 ... 110 V
Coil resistance [Ohm]	41 ... 16.010 Ohm
Contact material	AgSnO + 0,2µm Au AgSnO + 2 µm Au
Max. switching current [A]	8 A
Max. switching voltage [V]	230/240 V
Max. switching capacity [VA]	2000 VA
Switching capacity AC-15 at 230 V [Ie in A]	5 A
Switching capacity DC-13 at 24 V [Ie in A]	6 A (at 6 switching cycles / min.)
Electrical service life (with nominal load)	100,000 cycles
Short-circuit capacity 1000 A / AC 230 V [A]	6 A
Insulation	Reinforced insualtion

Function / Application	Safety relay
Product line	HENGSTLER
Relay family	480
Contactset	forcibly guided
According EN 50205	Application type A
Ambient temperature [°C]	-25 ... +75 °C
Soldering heat resistance [°C]	260 °C
Max. soldering time [s]	5 s
Pins pre-soldered with	Sn 100
Approval	TUV cULus
Standards	IEC EN 61810-3 (EN 50205) IEC EN 61810-1 UL 508
Meets the requirements	RoHS

Number of NO contacts	4
Number of NC contacts	2
Number of CO contacts	0
Size	2
Dimensions L x W x H [mm]	55,0 x 16,5 x 15,7 mm
Housing	washtight (RT III)
Shock resistance NO / NC [g]	20/3 g
Puls duration (half sinus)	11 ms
Vibration resistance NO / NC [g]	15/3 g
Frequency range [Hz]	10 - 200 Hz
Operating time NC contact, contact opens [ms]	11 ms
Operating time NO contact, contact closes [ms]	17 ms
Releasing time NO contact, contact opens [ms]	5 ms
Releasing time NC contact, contact closes [ms]	17 ms
Mechanical service life (without load)	10,000,000 switching cycles
Connection type	Solder pins for pcb
Weight [g]	30 g

Drive system	DC monostable
Nominal coil voltage [V]	5,5 ... 110 V
Coil resistance [Ohm]	41 ... 16.010 Ohm
Contact material	AgSnO + 0,2µm Au AgSnO + 2 µm Au
Max. switching current [A]	8 A
Max. switching voltage [V]	230/240 V
Max. switching capacity [VA]	2000 VA
Switching capacity AC-15 at 230 V [Ie in A]	5 A
Switching capacity DC-13 at 24 V [Ie in A]	6 A (at 6 switching cycles / min.)
Electrical service life (with nominal load)	100,000 cycles
Short-circuit capacity 1000 A / AC 230 V [A]	6 A
Insulation	Reinforced insualtion